Code: SC507
Description: LCT lift motor malfunction
1.The LCT upper limit sensor is not actuated after the LCT lift motor has been on for 15.0 seconds. 2. The LCT lower limit sensor is not actuated after the LCT lift motor has been on for 15.0 seconds. 3. The LCT upper limit sensor is not actuated after the LCT lift motor has been on for 1.5 seconds to lift up paper during copying. 4. The LCT upper limit sensor stays actuated after the LCT lift motor has been on for 1.5 seconds to lower the LCT tray. 5. Both the LCT upper and lower limit sensors are actuated when the LCT lift motor starts to lift the LCT tray. 6. The LCT upper limit sensor is outputting an OFF signal when the LCT pick-up solenoid is OFF.
1.The LCT upper limit sensor is not actuated after the LCT lift motor has been on for 15.0 seconds. 2. The LCT lower limit sensor is not actuated after the LCT lift motor has been on for 15.0 seconds. 3. The LCT upper limit sensor is not actuated after the LCT lift motor has been on for 1.5 seconds to lift up paper during copying. 4. The LCT upper limit sensor stays actuated after the LCT lift motor has been on for 1.5 seconds to lower the LCT tray. 5. Both the LCT upper and lower limit sensors are actuated when the LCT lift motor starts to lift the LCT tray. 6. The LCT upper limit sensor is outputting an OFF signal when the LCT pick-up solenoid is OFF.
Causes: • LCT upper limit sensor defective • LCT lower limit sensor defective • LCT lift motor defective • LCT interface board defective • BCU board defective • LCT cover switch defective