Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 005 — Lexmark X500

Code: 005

Description: Service Call Op Panel
Remedy: 1 Is the operator panel cable properly connected to the op panel? Go to step 2. Properly connect the cable to the op panel. 2 Is the op panel cable properly connected to the RIP board connector J-PNL1? Go to step 3. Properly connect the cable to J-PNL1. 3 Check the op panel cable continuity. Is there continuity? Go to step 4. Replace the flatbed unit. See “Flatbed assembly removal”. 4 Check Voltages on J-PNL1, located on the RIP card. Pin 1 voltage should measure 5V. Is it correct? Replace the operator panel. See “Operator panel removal”. Replace the system board. See “System board removal”.

← Xem tất cả mã lỗi Lexmark X500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie