Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H3 — Lexmark X500

Code: H3

Description: Service Call Fuser Unit Fusing temperature drops below fusing threshold during the printing process and does not reach fusing temperature again within alloted time.
Remedy: 1 Check for proper input line voltage. Is line voltage correct? Go to step 2. Provide proper line voltage. 2 Remove and reinstall fuser assembly. See “Fuser assembly removal”. Does error clear? Problem solved. Go to step 3. 3 Check fuser connector for damage. Replace if necessary. Does error clear? Problem solved. Go to step 4. 4 Turn printer off, and check cable that connects engine controller board connector FUCN to fuser for proper connection, continuity, and pin shorts. Is cable okay? Go to step 5. Properly connect cable or replace if damaged. If error clears, problem solved, otherwise go to step 5. 5 Replace fuser assembly. See “Fuser assembly removal”. Does error clear? Note: Fuser is a customer-ordered supply. Problem solved. Replace LVPS. See “Low voltage power supply (LVPS) with cage removal”. If error does not clear, replace engine controller board. See “Engine controller board removal”.

← Xem tất cả mã lỗi Lexmark X500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie