Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi L1 — Lexmark X500

Code: L1

Description: Service Call Laser Unit Assembly Laser scanning beam is not detected by beam sensor.
Remedy: 1 Check LCN connection on laser assembly LDU board. Is connector properly connected? Go to step 2. Properly connect LCN cable. If error clears, problem solved, otherwise go to step 2. 2 Check LCN connection on engine controller board. Is cable properly connected? Go to step 3. Properly connect LCN cable. If error clears, problem solved, otherwise go to step 3. 3 Check cable that connects engine controller board LCN and LDU LCN connectors for continuity and shorted pins. Is cable okay? Replace laser unit assembly. “Upper right rear cover removal”. Go to step 4. Replace cable. Go to step 4. 4 Does error clear? Problem solved. Replace engine controller board. See “Engine controller board removal”.

← Xem tất cả mã lỗi Lexmark X500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie