Code: N6
Description: Service Call LFU Connection Improper connection between engine controller board and lower paper feed unit.
Remedy: 1 Turn printer off, and remove engine controller board shield. See “Engine controller board removal” for steps to remove shield. Is cable properly connected to engine controller board connector MCN6? Go to step 2. Properly connect cable. Retest printer. If error clears, problem solved, otherwise go to step 2. 2 Remove right cover. See “Right cover removal”. Check cable that connects engine controller board connector MCN6 to lower feed unit for continuity and pin shorts. Is cable okay? Go to step 3. Replace cable. 3 Replace lower feed unit. See “Secondary paper feed assembly removal”. Does error clear? Problem solved. Go to step 4. 4 Replace engine controller board. See “Engine controller board removal”. Does error clear? Problem solved. Contact higher level support.