Code: 072-216
Display: Motor Error Error 072-216 Restart Printer
Description: <IOT Motor Failure> Option Feeder Motor failure is detected.
Remedy: 1 Is the 550-sheet feeder paper tray installed correctly? Go to step 3. Reinstall the paper tray, then go to step 2. 2 Does the error still occur when turning on the power? Go to step 3. Problem resolved. 3 Check the feed roll assembly and the separator roll assembly by turning them with your finger. Make sure they rotate smoothly. Do the rolls rotate smoothly? Go to step 4. Replace the rolls that do not turn properly. 4 Check the P/J422, P/J4221, and P/J4222 connectors between the 550-sheet feeder controller board and the 550-sheet feeder feed drive assembly. Are the cables connected securely? Go to step 5. Reconnect the P/J422, P/J4221, and P/J4222. Then go to step 5. 5 Check the feed motor by performing the Tray 3 Feed Motor Test: 1. In Service Mode, select Printer Diag, and press OK. 2. Select Engine Diag, and press OK. 3. Select Motor Tests, and press OK. 4. Select Tray 3 Feed Motor Test, and press OK. 5. Select a speed to test, and press OK to start the test. For example, select Tray 3 Feed Motor(FULL2). You will hear the motor run if it is function Does the tray 3 feed motor function correctly? Replace the controller board. See “Controller board removal”. Go to step 6. 6 Is the 550-sheet feeder drive assembly installed correctly? Go to step 7. Reinstall the 550- sheet feeder drive assembly. See “550-sheet feeder drive assembly removal”. 7 Does the error still occur when turning on the power? Go to “550-sheet feeder drive assembly service check”. Problem resolved.