Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X560n

Code: 010-351

Display: Fuser Error Error 010-351 Restart Printer
Description: <IOT Fuser Life Over> The fuser has reached the replacement time.
Remedy: 1 Is the fuser assembly installed correctly? Go to step 3. Reinstall the fuser assembly. See “Fuser removal”. Then go to step 2. 2 Does the error still occur when the power is turned on? Go to step 3. Problem resolved. 3 Replace the fuser assembly. See “Fuser removal”. Does the error still occur when the power is turned on? Replace the controller board. See “Controller board removal”. Problem resolved.

Code: 010-397

Display: Fuser Error Error 010-397 Error Code:xx Restart Printer
Description: <IOT Fuser Failure> A fuser error is detected.
Remedy: 1 Check the fuser installation. Is fuser installed correctly? Go to step 2. Reinstall the fuser assembly. Then go to step 2. 2 Does the error still occur when the print is turned on? Go to step 3. Problem resolved.

Code: 016-500

Display: Erase Flash Error Error 016-500 Restart Printer
Description: <Download Delete Error> An error occurred erasing the Flash
Remedy: 1 Reinstall the RIP board. See “RIP board removal”. Does the error display when the power is turned on? Replace the RIP board. See “RIP board removal”. Problem resolved.

Code: 016-501

Display: Write Flash Error Error 016-501 Restart Printer
Description: <Download Write Error> An error occurred writing to the Flash.
Remedy: 1 Reinstall the RIP board. See “RIP board removal”. Does the error display when the power is turned on? Replace the RIP board. See “RIP board removal”. Problem resolved

Code: 016-502

Display: Verify Flash Error Error 016-502 Restart Printer
Description: <Download Verify Error> An error occurred verifying the Flash.
Remedy: 1 Reinstall the RIP board. See “RIP board removal”. Does the error display when the power is turned on? Replace the RIP board. See “RIP board removal”. Problem resolved

Code: 016-503...016-507

Display: Email Error Invalid SMTP Server Error 016-503 Press OK Email Login Error SMTP Login Failed Error 016-507 Press OK
Description: <SMTP Server Address Resolution Fail for Maillib> Failed to Resolve SMTP Server Name at Mail Reception.
Remedy: 1 Check the network connection using the Ping command. Is the printer connected to the network? Go to step 2. Go to step 5. 2 Check the Address Book. 1. On the operator panel, press System to access the user menus. 2. Select Admin Menu, and press OK. 3. Select Address Book, and press OK. 4. Select the type of dialing. Is the Address Book in the Admin Menu set correctly? Go to step 3. Set the Address Book. 3 Do the settings of the MFP match the specifications for the server? Go to step 4. Change the server. 4 Reinstall the engine board. See “Engine board removal”. Does the error still occur when using the server? Replace the engine board. See “Engine board removal”. Problem resolved. 5 Reseat the network connector. Does the error still occur when using the server? If you have the Multi-Protocol Network Card (MPC), go to step 6. If you do not have the MPC, go to step 7. Problem resolved. 6 Reinstall the Multi-Protocol Network Card. Does the error still occur when using the server? Go to step 7. Problem resolved. 7 Check the Network Settings in the Admin Menu: 1. Press System to access the menus. 2. Select Admin Menu, and press OK. 3. Select Network Settings, and press OK. Are the MFP network settings correct? Go to step 8. Set the Network Settings correctly. 8 Reinstall the RIP board. Does the error still occur when using the server? Replace the RIP board. See “RIP board removal”. Return to step 7, and recheck the network settings.

Code: 016-718

Display: Out of Memory Error 016-718 Press OK
Description: <Memory Overflow> Exceeds the memory capacity.
Remedy: 1 Check the memory capacity by printing a small file or test page. Does the error still occur when printing a small job? Go to step 2. Add additional memory, or divide the printing job. 2 Reinstall the memory card. See “Memory card removal”. Does the error still occur when test printing? Go to step 3. Problem resolved. 3 Check the memory capacity: 1. On the operator panel, press System to access the customer menus. 2. Select Setup, and press OK. 3. Select Information Pages, and press OK. 4. Select Configuration, and press OK. Is all the memory capacity you have installed being recognized by the MFP? Go to step 4. Replace the RIP board. See “RIP board removal”. 4 Replace the memory card. See “Memory card removal”. Does the error still occur when test printing? Replace the RIP board. See “RIP board removal”. Problem resolved.

Code: 016-720

Display: PDL Error Error 016-720 Press OK
Description: <PDL Error> PDL error occurs.
Remedy: 1 Print a small file, such as a test page. Does the error still occur when printing? Go to step 2. Problem solved. 2 Reinstall the RIP board. See “RIP board removal”. Does the error still occur when printing? Replace the RIP board. See “RIP board removal”. Problem solved.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie