Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 200.00, 200.01, 200.02 — Lexmark X646e

Code: 200.00, 200.01, 200.02

Description: 200 .00 Paper jam around input sensor. • Multi-sheet feed that is shingled. • Tray size sensing wrong size • Paper jam leaving page over sensor 200 .01 Input sensor covered too long. • Multi-sheet feed that is shingled. • Tray size sensing wrong size. • Paper jam leaving page over sensor. 200 .02 Input sensor covered too long. • Multi-sheet feed that is shingled. • Tray size sensing wrong size. • Paper jam leaving page over sensor.
Remedy: 1 Input sensor flag Check the input sensor flag for damage and proper operation. If a problem is found, repair as necessary. 2 System board Check for approximately +5 V dc at J15-10 on the system board. If incorrect, replace the system board. 3 Input sensor cable Check the continuity of the input sensor cable section of the front wiring harness. If incorrect, replace the harness. If correct, replace the input sensor assembly.

← Xem tất cả mã lỗi Lexmark X646e

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie