Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 4000 — Kyocera FS9100DN

Code: 4000

Description: Polygon motor synchronization problem
• The polygon motor does not reach the stable speed within 15 s of the polygon motor remote signal turning on.
Causes: Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective power supply unit. Defective engine controller PWB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the LSU (see page 1-6-11). Check if 24 V DC is supplied to CN2-1 on the engine controller PWB. If not, replace the power supply unit. Check if 24 V DC is output from CN8-10 on the engine controller PWB. If not, replace the engine controller PWB.

← Xem tất cả mã lỗi Kyocera FS9100DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie