Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 4010 — Kyocera FS9100DN

Code: 4010

Description: Polygon motor steady-state problem
• The polygon motor rotation is not stable for 600 ms after the polygon motor rotation has been stabilized.
Causes: Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective power supply unit. Defective engine controller PWB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the LSU (see page 1-6-11). Check if 24 V DC is supplied to CN2-1 on the engine controller PWB. If not, replace the power supply unit. Check if 24 V DC is output from CN8-10 on the engine controller PWB. If not, replace the engine controller PWB.

← Xem tất cả mã lỗi Kyocera FS9100DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie