Code: 6050
Description: Abnormally low fuser unit thermistor temperature
• The fuser temperature remains below 120 °C/248 °F for 10 s. • When power is turned on, the fuser temperature does not reach 40 °C/ 104 °F even if 14 (FS-9100DN) or 20 (9500DN) seconds elapse.
• The fuser temperature remains below 120 °C/248 °F for 10 s. • When power is turned on, the fuser temperature does not reach 40 °C/ 104 °F even if 14 (FS-9100DN) or 20 (9500DN) seconds elapse.
Causes: Poor contact in the fuser unit thermistor connector terminals. Broken fuser unit thermistor wire. Fuser unit thermistor installed incorrectly. Fuser unit thermostat triggered. Fuser unit heater M or S installed incorrectly. Broken fuser unit heater M or S wire.
Remedy: Check the connection of connector CN10 on the engine controller PWB and the continuity across the connector terminals. Repair or replace if necessary. Measure the resistance. If it is ∞, replace the fuser unit thermistor (see page 1-6-22). Check and reinstall if necessary. Check for continuity. If none, replace the fuser unit thermostat (see page 1-6-22). Check and reinstall if necessary. Check for continuity. If none, replace the fuser unit heater M or S (see page 1-6-20).