Code: 6420
Description: Broken fuser unit thermistor wire
• The fuser temperature remains at 0 °C/32 °F for 30 s continuously when the fuser heater is on. co
• The fuser temperature remains at 0 °C/32 °F for 30 s continuously when the fuser heater is on. co
Causes: Poor contact in the fuser unit thermistor connector terminals. Broken fuser unit thermistor wire.
Remedy: Check the connection of connector CN10 on the engine controller PWB and the continuity across the connector terminals. Repair or replace if necessary. Measure the resistance. If it is ∞, replace the fuser unit thermistor.