Code: C2000
Description: Main motor problem
• LOCK ALM signal remains high for 1 s, 1 s after the main motor has turned on.
• LOCK ALM signal remains high for 1 s, 1 s after the main motor has turned on.
Causes: Poor contact in the main motor connector termi-nals. Defective main motor rotation control circuit. Defective drive transmission sys-tem.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the main motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.