Code: C3200
Description: Exposure lamp problem
• In indicator check before starting copying, the average value in scanning of the shading plate with the CCD is 128 or more.
• In indicator check before starting copying, the average value in scanning of the shading plate with the CCD is 128 or more.
Causes: Defective scanner board (KP-5063). Defective exposure lamp or inverter board. Incorrect shading position. Poor contact of the connector terminals.
Remedy: Replace the scanner board (KP-5063) and check for correct operation. Replace the exposure lamp or inverter board. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor. Check the connection of connector YC-6 on the scanner board (KP-5063), and the continuity across the connector terminals. Repair or replace if necessary.