Code: C200
Description: Drive motor problem
• LOCK ALM signal remains high for 1 s, 1 s after the drive motor has turned on.
• LOCK ALM signal remains high for 1 s, 1 s after the drive motor has turned on.
Causes: Poor contact of the drive motor connector terminals. Defective drive motor rotation control circuit. Defective drive transmission system.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Replace the drive motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.