Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM1525

Code: C011

Description: Backup memory data problem
• Data in the specified area of the backup memory does not match the specified values.
Causes: Defective main PCB.
Remedy: Replace the main PCB and check for correct operation.

Code: C100

Description: Exposure lamp problem
• Check the CCD input value for the lighting status of the exposure lamp 100 ms after the exposure lamp is lit and the carriage is moved to the shading position. If the exposure lamp does not light, turn off the lamp. After 500 ms, light the lamp again and, a further 500 ms later, check the CCD input. The exposure lamp does not light after 5 retries.
Causes: Poor contact of the connector terminals. Defective exposure lamp. Defective main PCB. Incorrect shading position. CCD PCB output problem.
Remedy: Check the connection of connectors CN24, CN23, CN22 and CN3 on the main PCB, and the continuity across the connector terminals. Repair or replace if necessary. Replace the exposure lamp or inverter PCB. Replace the main PCB and check for correct operation. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position switch. Replace the ISU.

Code: C104

Description: Optical system problem
• After AGC, correct input is not obtained at CCD.
Causes: Poor contact of the connector terminals.CCD PCB output problem. Defective main PCB.
Remedy: Check the connection of connectors CN23, CN22 and CN3 on the main PCB, and the continuity across the connector terminals. Repair or replace if necessary. Replace the ISU. Replace the main PCB and check for correct operation.

Code: C200

Description: Drive motor problem
• LOCK ALM signal remains high for 1 s, 1 s after the drive motor has turned on.
Causes: Poor contact of the drive motor connector terminals. Defective drive motor rotation control circuit. Defective drive transmission system.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Replace the drive motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Code: C310

Description: Scanner carriage problem
• The home position is not correct when the power is turned on or at the start of copying using the contact glass.
Causes: Poor contact of the connector terminals. Defective scanner home position switch. Defective main PCB. Defective scanner motor.
Remedy: Check the connection of connectors CN28 and CN25 on the main PCB and the continuity across the connector terminals. Remedy or replace if necessary. Replace the scanner home position switch. Replace the main PCB and check for correct operation. Replace the scanner motor.

Code: C400

Description: Polygon motor synchronization problem
• The polygon motor does not reach a stable speed within 19 s of the polygon motor remote signal turning on.
Causes: Poor contact of the polygon motor connector terminals.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.

Code: C401

Description: Polygon motor steady-state problem
• The polygon motor rotation is not stable for 400 ms after the polygon motor rotation has been stabilized.
Causes: Poor contact of the polygon motor connector terminals. Defective power source PCB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check if 24 V DC is present at CN3-1 and CN3-2 on the power source PCB. If not, replace the power source PCB.

Code: C420

Description: BD steady-state problem
• The VTC detects a BD error for 800 ms after the polygon motor rotation has been stabilizad.
Causes: Defective power source PCB. Poor contact of the laser scanner unit connector terminals.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Replace the LSU. Replace the main PCB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie