Code: C242
Description: Lower lift motor problem • When the drawer is inserted, the lower lift limit switch does not turn on within 4 to 5 s of the lower lift motor turning on. • During copying, the lower lift limit switch does not turn on within 200 ms of the lower lift motor turning on.
Causes: Broken gears or couplings of the lower lift motor Defective lower lift motor. Poor contact of the lower lift motor connector terminals.
Remedy: Replace the lower lift motor. Check for continuity across the coil. If none, replace the lower lift motor. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Check if CN15-4 on the engine PCB goes low when the lower lift limit switch is turned on. If not, replace the upper lift limit switch. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.