Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C640 — Kyocera KM4230

Code: C640

Description: Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 3 s Others: 5 s
Causes: Poor contact of the connector terminals. Defective power source PCB. Defective main PCB.
Remedy: Check the connection of connectors CN10-5 on the main PCB and CN4-3 on the power source PCB, and the continuity across the connector terminals. Repair or replace if necessary. Check if the zero-crossing signal is output from CN4-3 on the power source PCB. If not, replace the power source PCB. Replace the main PCB if C640 is detected while CN4-3 on the power source PCB outputs the zero-crossing signal.

← Xem tất cả mã lỗi Kyocera KM4230

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie