Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0F34 — Kyocera KMC1530

Code: C0F34

Description: Abnormally low toner density detected by Yellow ATDC Sensor
Toner density that is 2 % or more lower than the target level is detected ten consecutive times during a print cycle, ATVC, or image stabilization sequence.
Remedy: 1 ATDC Sensor window is dirty. YES: Clean. 2 ATDC Sensor spring moving part operates properly. NO: Correct. 3 Hopper supplies toner properly. NO: Correct. 4 ATDC Sensor LED is dirty. YES: Clean. 5 ATDC Sensor LED emits light properly. NO: Check connector for connection. Check harness. 6 Imaging Unit Shutter operates properly. NO: Correct. 7 The problem has been eliminated through the checks of steps up to 6. NO: Change Master Board.

← Xem tất cả mã lỗi Kyocera KMC1530

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie