Code: C1010
Description: Overcurrent detection of drawer 1 base motor • Excessive current has flowed through the first drawer base motor which elevates the bottom plate in the drawer. • Lift-up does not finish even after 8 seconds. • Detection occurs twice continuously after the drawer 1 is removed and then inserted.
Causes: Defective upper drawer base motor. Defective bottom plate elevation mechanism of drawer 1. Defective main board of paper feeder. Defective engine controller PCB.
Remedy: Replace the upper drawer base motor. Check whether there is an object that prevents the bottom plate of drawer 1 from operating normally. Replace the main board of paper feeder. Replace the engine controller PCB and check for correct operation.