Code: C2102
Description: Color developers drive motor lock • The FG (Frequency generation) pulse which the color developers drive motor generates is not entered at the correct frequency in ASIC (U8) on the engine controller PCB during normal operation (after self-diagnostics codes 2112 and 2122 are cleared).
Causes: Defective engine controller PCB. Defective color developers drive motor. Excessive torque for driving color developers. (Overloaded by a damaged gear.) Defective harness between engine controller PCB and color developers drive motor, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the color developers drive motor. Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any. Check the continuity of the harness and the insertion of connectors.