Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6000 — Kyocera KMC850

Code: C6000

Description: Heat roller heating time-out 1 • The temperature on the heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PCB has turned on the upper heater lamp. This is detected when the upper heater lamp is turned on.
Causes: Defective engine controller PCB. Defective upper fuser heater. Defective upper thermostat. Defective fuser PCB. Defective upper fuser thermistor, or fitting is not proper. Defective power supply unit. Defective harness between engine controller PCB and fuser unit, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the fuser unit (upper fuser heater). Replace the fuser unit (upper thermostat). Replace the fuser unit (fuser PCB). Replace the fuser unit (upper fuser thermistor). Replace the power supply unit. Check the continuity of the harness and the insertion of connectors.

← Xem tất cả mã lỗi Kyocera KMC850

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie