Code: 2560
Description: Conveying motor 1 startup error
Conveying motor 1 is not stabilized within 2 s since the motor is activated.
Conveying motor 1 is not stabilized within 2 s since the motor is activated.
Causes: Defective connector cable or poor contact in the connector. Defective drive transmission system. Defective motor. Defective PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Conveying motor 1 and engine PWB (YC2)
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective motor. Replace the conveying motor 1.
Defective PWB. Replace the engine PWB and check for correct operation.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective motor. Replace the conveying motor 1.
Defective PWB. Replace the engine PWB and check for correct operation.