Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 2550ci

Code: 0030

Description: FAX control PWB system error
Processing with the fax software was disabled due to a hardware problem.
Causes: Defective PWB.
Remedy: Replace the fax control PWB and check for correct operation.

Code: 0070

Description: FAX control PWB incompatible detection error
In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
Causes: Defective FAX software. Defective PWB.Defective PWB.
Remedy: Defective FAX software. Install the fax software.
Defective PWB. Replace the fax control PWB and check for correct operation.

Code: 0100

Description: Backup memory device error
Causes: Defective flash memory. Defective PWB.
Remedy: Replace the main PWB and check for correct operation.

Code: 0120

Description: MAC address data error
The data includes an invalid MAC address.
Causes: Defective flash memory. Defective PWB.
Remedy: Defective flash memory. Replace the main PWB and check for correct operation.
Defective PWB. Replace the engine PWB and check for correct operation.

Code: 0150

Description: Backup memory read/write error (engine PWB)
Detecting engine PWB EEPROM communication error.
Causes: The engine PWB EEPROM was improperly installed. Defective PWB. Defective EEPROM.
Remedy: The engine PWB EEPROM was improperly installed. Check the EEPROM is properly installed and remedy if necessary.
Defective PWB. Replace the engine PWB and check for correct operation.
Defective EEPROM. Contact the Service Administrative Division.

Code: 0160

Description: Backup memory data error (engine PWB)
Causes: Defective flash memory. Defective PWB.
Remedy: Replace the engine PWB and check for correct operation.

Code: 0170

Description: Billing counting error
A checksum error is detected in the main and engine backup memories for the billing counters.
Causes: Data in the EEPROM. Defective PWB.
Remedy: Data in the EEPROM . Contact the Service Administrative Division.
Defective PWB. Replace the main PWB or the engine PWB and check for correct operation.

Code: 0180

Description: Machine number mismatch
Machine number of main and engine does not match.
Causes: Data in the EEPROM.
Remedy: Contact the Service Administrative Division.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie