Code: 4001
Description: Polygon motor synchronization error
After polygon motor is driven, the ready signal does not turn to L within 30 s.
After polygon motor is driven, the ready signal does not turn to L within 30 s.
Causes: Defective connector cable or poor contact in the connector.
Defective polygon motor.
Defective engine PWB.
Defective polygon motor.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Polygon motor and engine PWB (YC15)
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.