Description: Tray 3 feeder up/down abnormality
• The paper feed tray 3 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Remedy: 1 Check the M9 connector for proper connection and correct as necessary. 2 Check the connector of M9 for proper drive coupling and correct as necessary. 3 PS15 I/O check PRCB CN9PRCB-3 (ON) D-9. 4 M9 operation check PRCB CN7PRCB-9 (REM) D-11. 5 Change M9. 6 Change PRCB.