Display: Print Unable 05 Turn the power off and then back on again.
Description: After the center thermistor of the fuser unit was normally heated, it detected a temperature lower than the specified value.
Causes: 1 Connection failure of the center or side thermistor harness of the fuser unit 2 Connection failure of the heater harness of the fuser unit 3 Harness connection failure of the eject sensor PCB 4 Harness connection failure of the low-voltage power supply PCB 5 Eject sensor PCB failure 6 Fuser unit failure 7 Low-voltage power supply PCB failure 8 Main PCB failure