Causes: [3003] HDD timeout Check performed only when HDD is installed: • HDD device was busy for over 31 seconds. • A diagnostic command was set for the HDD, but the device remained busy for over 6 seconds. • Defective HDD device • Defective HDD connector • Defective ASIC device • Replace or uninstall the HDD device. • Replace the HDD connector. • Replace the controller board. [3004] Diagnostics command error Diagnostic command issued an error. • Defective HDD device • Replace or remove the HDD device. [3013] HDD timeout (First machine) HDD device was busy for over 31 seconds, or Mandolin was not detected. A diagnostic command is set for the HDD, but the device remains was busy for over 6 seconds. • Defective HDD device • Defective HDD connector • Defective ASIC device • Replace or remove the HDD device. • Replace the HDD connector • Replace the controller board [3014] Diagnostics command error (First machine) Diagnostic command issued an error because Mandolin was not detected, or there was a w/r/c error in the HDD register • Defective HDD device • Replace the HDD device.