Causes: [6101] MAC address check sum error The result of the MAC address check sum did not match the check sum stored in ROM. • Defective SEEP ROM • Defective I2C bus (connection) • Replace the controller board [6104] PHY IC error The PHY IC on the controller was not recognized. • Defective PHY chip • Defective ASIC MII I/F • Replace the controller board [6105] PHY IC loop-back error An error occurred during the loop-back test for the PHY IC on the controller. • Defective PHY chip • Defective MAC of ASIC (SIMAC/COMIC/CELLO) • Defective I/F with the PHY board • Defective soldered connection on the PHY board • Replace the controller board