Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 795-29 — Ricoh Aficio Pro C720

Code: 795-29

Description: Cutter Motor (M35) Error PB (D391) One of the following occurred: • The cutter blade did not move after it was moved to the rear (it did not leave home position). • The blade did not move away from the cutting point on the blade cradle (it did not arrive at the home position). • The blade did not move for a rear-to-front cut. • The blade did not move away from the blade cradle to the front within 10 sec. • When moving from the front, the blade did not reach the blade cradle within 10 sec. • When moving from the rear, the blade did not reach the blade cradle.
Causes: • Cutter motor (M35) connections loose, broken, defective • Motor defective • Blade sensor 1, 2 (S84, S85) sensor harness loose, broken, defective • Sensor defective • Blade is dull, cutting poorly Note: Sensors S84, S85 are on the cutter area PCB.
Remedy:

← Xem tất cả mã lỗi Ricoh Aficio Pro C720

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie