Code: SC508-00
Description: By-pass bottom plate operation error The signal from the by-pass bottom plate HP Sensor has not changed (that is, the signal has not changed from ON to OFF or vice versa) for 4 seconds or more after the start of reverse Paper Feed Unit rotation. If the error is detected three times in succession, the appropriate SC number is displayed on the operation panel unit.
Causes: • By-pass bottom plate HP sensor connector disconnected or other error • By-pass bottom plate HP sensor feeler stuck or other error
Remedy: • Check and replace the by-pass bottom plate HP sensor connector connection. • Replace the by-pass bottom plate HP sensor feeler. • Replace the harness. • Replace the engine board.