• Code: 25
• Description: Ink cartridges had already been loaded when the power was first applied.
• Remedy: Reload ink cartridges, referring to the Owner's Manual.

• Code: 26
• Description: The black ink has run out.
• Remedy: • Ink cartridges • Ink cartridge sensor PCB • Needle tube & head flat cable ASSY •Main PCB

• Code: 27
• Description: The yellow ink has run out.
• Remedy: • Ink cartridges • Ink cartridge sensor PCB • Needle tube & head flat cable ASSY •Main PCB

• Code: 28
• Description: The cyan ink has run out.
• Remedy: • Ink cartridges • Ink cartridge sensor PCB • Needle tube & head flat cable ASSY •Main PCB

• Code: 29
• Description: The magenta ink has run out.
• Remedy: • Ink cartridges • Ink cartridge sensor PCB • Needle tube & head flat cable ASSY •Main PCB

• Code: 3X
• Description: Carriage travel error
• Remedy: • Any obstacle to the travel of the carriage in the machine? • Recording paper jammed? • Carriage ASSY • CR encoder strip (Any stains or scratches? Hooked correctly?) • Carriage motor •Main PCB • Power supply PCB • Purge unit • Engine lower frame

• Code: 41
• Description: The head drive voltage has not been turned from Low to High within the specified time.
• Remedy: • Carriage ASSY •Main PCB • Print head unit • Power supply PCB

• Code: 42
• Description: The head drive voltage has not been turned from High to Low within the specified time.
• Remedy: • Carriage ASSY •Main PCB • Print head unit • Power supply PCB