Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP4020C — Trang 3/8

Code: 50

Description: The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
Remedy: • Purge unit • Engine lower frame • Paper feed motor •Main PCB

Code: 51

Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses.
Remedy:

Code: 52

Description: The purge cam HP switch does not detect the origin point.
Remedy: • Purge unit • Engine lower frame • Paper feed motor •Main PCB

Code: 54

Description: The air pump motor does not rotate.
Remedy:

Code: 55

Description: The air pump motor rotates abnormally. (This code may appear only in the maintenance mode.)
Remedy: • Air pump & motor module • Driver PCB

Code: 60, 61, 62, 63

Description: Paper width sensor (media sensor) error.
Remedy: • Replace the needle tube & head flat cable ASSY

Code: 68

Description: The ASF switch remains OFF after the ASF motor is driven by the specified steps.
Remedy:

Code: 69

Description: The ASF switch remains ON after the ASF motor is driven by the specified steps.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie