Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP7055 — Trang 5/10

Code: 84

Description: Paper jam at the rear section of the machine.
Causes:
Remedy: 1 Foreign object in the feed system at the rear section of the machine. Remove the foreign object in the feed system at the rear section of the machine. 2 Paper eject actuator assembling failure Re-assemble the paper eject actuator. 3 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: 88

Description: Paper jam inside the machine.
Causes:
Remedy: 1 Harness connection failure of paper eject sensor PCB ASSY Check the harness connection of the paper eject sensor PCB ASSY and reconnect it. 2 Paper eject actuator catching on some position Correct the position of the paper eject actuator. 3 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 4 Fuser unit gear damaged Replace the Fuser unit. 5 Main PCB failure Replace the main PCB ASSY.

Code: 89

Description: Paper of the size not supported for duplex printing is set in the tray.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 8A

Description: Paper jam in the paper tray1.
Causes: • Check if the paper is jammed at the paper tray and the front cover. • Adjust the paper guide corresponding to the paper size. • Check if the thickness of the paper is 60 to 105 g/m2. • Check if too much paper is loaded in the tray
Remedy: 1 Paper edge actuator catching on some position Correct the position of the paper edge actuator. 2 Registration front actuator catching on some position Correct the position of the registration front actuator. 3 Harness connection failure of registration front/rear sensor PCB ASSY Check the harness connection of the registration front/rear sensor PCB ASSY and reconnect it. 4 Paper feeding kit worn out Replace the paper feeding kit. 5 High voltage power supply PCB failure Replace the high voltage power supply PCB ASSY. 6 Registration front/rear sensor PCB failure Check the registration front/rear sensor performance following the procedure described in "Function code 32". If any problem occurs, replace the regist frame ASSY.

Code: 8D

Description: Paper jam occurred around the back cover at the time when the power was turned ON, or the back cover is open.
Causes: • Close the fuser cover. • Remove the jammed paper around the back cover.
Remedy: 1 Paper eject actuator catching on some position Correct the position of the paper eject actuator. 2 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 9A

Description: Not detect paper at feeding from manual feed slot.
Causes: • Load the paper into the manual feed slot.
Remedy: 1 Harness connection failure of registration front/rear sensor PCB ASSY. Check the harness connection of the registration front/rear sensor PCB ASSY and reconnect it. 2 High voltage power supply PCB failure Replace the high voltage power supply PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY. 4 Registration front sensor failure Check the registration front sensor performance following the procedure described in "Function code 32". If any problem occurs, replace the regist frame ASSY

Code: 9B

Description: Life of toner cartridge
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 9C

Description: Life of toner cartridge (Continue mode)
Causes: • Replace a new toner cartridge.
Remedy: 1 New toner actuator catching on some position Correct the position of the new toner actuator. 2 Harness connection failure of new toner sensor PCB Check the harness connection of the new toner sensor PCB and reconnect it. 3 New toner sensor PCB failure Replace the new toner sensor PCB. 4 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie