Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP7057 — Trang 4/10

Code: 7A

Description: A lock signal of the main motor cannot be detected.
Causes:
Remedy: 1 Flat cable connection failure of main motor Check the flat cable connection of the main motor and reconnect them. 2 Main motor failure Replace the main motor. 3 Low voltage power supply PCB failure Replace the low voltage power supply PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: 7B

Description: An unidentified error occurred.
Causes: Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 7C

Description: An unidentified error occurred.
Causes: Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 7D

Description: Dirt on drum unit.
Causes: • Clean the corona wire of drum unit. • Turn OFF the power switch, and turn it ON again after a while.
Remedy: 1 Dirt on the electrode of the drum unit and on the machine Clean the dirt on the contact points of the both electrodes. (Refer to Fig. 2-11, Fig. 2-12) 2 High voltage power supply PCB failure Replace the high voltage power supply PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 7E

Description: An unidentified error occurred.
Causes: Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 7F

Description: FAX paper size is incorrect. (Menu setting)
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 80

Description: FAX paper size is incorrect. (The actually loaded paper is small)
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 83

Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.)
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie