Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP7060D — Trang 10/10

Code: EF

Description: The supplied power is unstable.
Causes:
Remedy: 1 The irregular power supply is detected Replace the low voltage power supply PCB ASSY. Reset the irregular power supply detection counter following the procedure described in "5. IF YOU REPLACE THE PANEL UNIT" in Chapter 4. 2 Main PCB failure Replace the main PCB ASSY.

Code: F0

Description: USB flash memory does not work properly
Causes:
Remedy: 1 Malfunction of firmware Rewrite the latest firmware. 2 Main PCB failure Replace the main PCB ASSY.

Code: F9

Description: The country code is not entered properly.
Causes:
Remedy: 1 Power turned OFF while the function code 74 is being executed and “PARAMETER INTI” is being displayed Re-enter the country code. (Refer to "1.4.20 Setting by country (Function code 74)" in Chapter 5.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie