• Code: 9E
• Description: Toner cartridge whose color is used reaches the end of life when implementing auto color registration from the control panel.
• Causes:
• Remedy:

• Code: A2
• Description: Document is too long.
• Causes: 1 Document rear actuator not operating smoothly or catching in some position.
• Remedy: 1 Document rear actuator not operating smoothly or catching in some position. Correct smooth operation and that there is no catching of document rear actuator.

• Code: A3
• Description: Document rear sensor is not turned on when feeding the document.
• Causes: 1 Document rear actuator not operating smoothly or catching in some position. 2 Document rear sensor failure.
• Remedy: 1 Document rear actuator not operating smoothly or catching in some position. Correct smooth operation and that there is no catching of document rear actuator. 2 Document rear sensor failure. Replace the document rear sensor.

• Code: A5
• Description: Fax scanning error (The first warning only)
• Causes: 1 Scanning failure
• Remedy: Turn the power switch off and on. Then, try scanning again.

• Code: A6
• Description: Fax scanning error (The second warning that the same error with A5 occurs again)
• Causes: 1 Scanner unit failure. 2 Main PCB failure.
• Remedy: 1 Scanner unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.

• Code: A7
• Description: Color parameter failure
• Causes: 1 Main PCB failure. 2 FB unit failure.
• Remedy: 1 Main PCB failure Replace the main PCB ASSY. 2 FB unit failure Replace the FB unit.

• Code: AD
• Description: DMA transfer error
• Causes: 1 Main PCB failure. 2 Scanner unit failure
• Remedy: 1 Main PCB failure Replace the main PCB ASSY. 2 Scanner unit failure Replace the FB unit.

• Code: AE
• Description: FB unit home position sensor is not turned on.
• Causes: 1 Scanner unit failure. 2 Drive PCB failure. 3 Scanner motor failure. 4 Main PCB failure.
• Remedy: 1 Scanner unit failure Replace the FB unit. 2 Drive PCB failure Replace the drive PCB. 3 Scanner motor failure Replace the scanner motor. 4 Main PCB failure Replace the main PCB ASSY.