Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9045CDN — Trang 12/15

Code: AF

Description: FB unit home position sensor is not turned off.
Causes: 1 Scanner unit failure. 2 Drive PCB failure. 3 Scanner motor failure. 4 Main PCB failure.
Remedy: 1 Scanner unit failure Replace the FB unit. 2 Drive PCB failure Replace the drive PCB. 3 Scanner motor failure Replace the scanner motor. 4 Main PCB failure Replace the main PCB ASSY.

Code: B0

Description: Harness for scanning is not connected correctly.
Causes: 1 Scanner harness not connected correctly. 2 Scanner harness broken. 3 Main PCB failure.
Remedy: 1 Scanner harness not connected correctly. Reconnect the scanner harness correctly. 2 Scanner harness broken Replace the FB unit. Replace the FFC cable ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: B2

Description: Gain control data level error for CCD unit scanning.
Causes:
Remedy:

Code: B3

Description: Detection error of the scanning area on the left end
Causes: 1 Scanner unit failure. 2 Main PCB failure
Remedy: 1 Scanner unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: B4

Description: Detection error of the scanning area on the right end
Causes: 1 Scanner unit failure. 2 Main PCB failure
Remedy: 1 Scanner unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: B5

Description: Detection error of horizontal scanning edge reduction in scanning area setting
Causes: 1 White tape dirty of FB unit. 2 Scanner unit failure. 3 Main PCB failure.
Remedy: 1 White tape dirty of FB unit Clean the white tape. 2 Scanner unit failure Replace the FB unit. 3 Main PCB failure Replace the main PCB ASSY

Code: B6

Description: Detection error of horizontal scanning edge magnification in scanning area setting
Causes: 1 White tape dirty of FB unit. 2 Scanner unit failure. 3 Main PCB failure.
Remedy: 1 White tape dirty of FB unit Clean the white tape. 2 Scanner unit failure Replace the FB unit. 3 Main PCB failure Replace the main PCB ASSY

Code: B9

Description: Scanning light adjustment error is detected.
Causes: 1 Scanner unit failure. 2 Main PCB failure.
Remedy: 1 Scanner unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie