Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9055CDN — Trang 22/28

Code: BD

Description: Black level data error.
Causes: 1 Second side scanning CIS failure. 2 Document scanner unit failure. 3 Main PCB failure
Remedy: 1 Second side scanning CIS failure Replace the second side scanning CIS. 2 Document scanner unit failure Replace the document scanner unit. 3 Main PCB failure Replace the main PCB ASSY.

Code: BE

Description: The scanning area start edge detection error.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: BF

Description: The document is too long for ADF duplex feeding.
Causes: 1 Document second side rear actuator catching on some position. 2 Main PCB failure
Remedy: 1 Document second side rear actuator catching on some position Correct catching of the document second side rear actuator. 2 Main PCB failure Replace the main PCB ASSY.

Code: C0

Description: Failure to detect a new black toner cartridge.
Causes: 1 Power off or front cover opened while detecting a new toner cartridge
Remedy: Reset the developing bias voltage and developer roller counter.

Code: C1

Description: Failure to detect a new yellow toner cartridge.
Causes: 1 Power off or front cover opened while detecting a new toner cartridge
Remedy: Reset the developing bias voltage and developer roller counter.

Code: C2

Description: Failure to detect a new magenta toner cartridge
Causes: 1 Power off or front cover opened while detecting a new toner cartridge
Remedy: Reset the developing bias voltage and developer roller counter.

Code: C3

Description: Failure to detect a new cyan toner cartridge.
Causes: 1 Power off or front cover opened while detecting a new toner cartridge
Remedy: Reset the developing bias voltage and developer roller counter.

Code: C4

Description: Paper tray 2 pressing plate up/ down error.
Causes: 1 Harness connection failure of T2 plate motor ASSY. 2 Harness connection failure of T2 Relay PCB ASSY. 3 T2 plate-up detection sensor failure. 4 T2 Relay PCB ASSY failuresor failure. 5 Engine PCB failure. 6 T2 plate motor ASSY failurer failure
Remedy: 1 Harness connection failure of T2 plate motor ASSY Check the harness connection of the T2 plate motor ASSY and reconnect it. 2 Harness connection failure of T2 Relay PCB ASSY Check the harness connection of the T2 Relay PCB ASSY and reconnect it. 3 T2 plate-up detection sensor failure Check the sensor performance following the procedure described in “Function code 32”. If any problem occurs, replace the T2 paper feed frame unit. 4 T2 Relay PCB ASSY failure Replace the T2 Relay PCB ASSY. 5 Engine PCB failure Replace the engine PCB ASSY. 6 T2 plate motor ASSY failure Replace the paper tray 2.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie