Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9055CDN — Trang 24/28

Code: CD

Description: The drum unit is not installed.
Causes: 1 Dirt on the electrode of the drum unit and on the machine. 2 Bend of electrode contact of main body. 3 Contact failure between the electrode of the high-voltage power supply PCB and that of the machine. 4 High-voltage power supply PCB failure. 5 Engine PCB failure.
Remedy: 1 Dirt on the electrode of the drum unit and on the machine Clean the dirt on the contact points of the both electrodes. (Refer to Fig. 2-10 (P2-62) and Fig. 2-13 (P2-63)) 2 Bend of electrode contact of main body Correct the bend of the electrode contact of the main body. 3 Contact failure between the electrode of the high-voltage power supply PCB and that of the machine Clean the electrodes of the high-voltage power supply PCB ASSY. 4 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 5 Engine PCB failure Replace the engine PCB ASSY.

Code: CE

Description: The waste toner box is not installed.
Causes: 1 Waste toner sensor failure. 2 High-voltage power supply PCB failure. 3 Main PCB failure.
Remedy: 1 Waste toner sensor failure Check the sensor performance following the procedure described in “Function code 32”. If any problem occurs, replace the waste toner sensor. 2 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: CF

Description: Waste toner box full. (The sensor detects that the waste toner is full.)
Causes: 1 Harness connection failure of waste toner sensor. 2 Waste toner sensor failure. 3 High-voltage power supply PCB failure. 4 Main PCB failure.
Remedy: 1 Harness connection failure of waste toner sensor Check the harness connection of the waste toner sensor and reconnect it. 2 Waste toner sensor failure Check the sensor performance following the procedure described in “Function code 32”. If any problem occurs, replace the waste toner sensor. 3 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: D0

Description: Touch panel initialization failure.
Causes: 1 Harness connection failure of LCD unit. 2 Touch panel ASSY failure. 3 Main PCB failure
Remedy: 1 Harness connection failure of LCD unit Check the harness connection of the LCD unit and reconnect it. 2 Touch panel ASSY failure Replace the touch panel ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: D1

Description: Modem initialization failed.
Causes: 1 NCU PCB failure. 2 Main PCB failure
Remedy: 1 NCU PCB failure Replace the NCU PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.

Code: D2...DC

Description: Modem error.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: DE

Description: When the center thermistor is higher than the idle temperature, it is detected that the side thermistor temperature is lower than 60 °C.
Causes: 1 Harness connection failure between paper eject sensor PCB ASSY and fuser unit. 2 Side thermistor or center thermistor failure. 3 Paper eject sensor PCB ASSY failure. 4 Main PCB failure.
Remedy: 1 Harness connection failure between paper eject sensor PCB ASSY and fuser unit Check the harness connection between the paper eject sensor PCB ASSY and fuser unit, and reconnect it. 2 Side thermistor or center thermistor failure Replace the fuser unit. 3 Paper eject sensor PCB ASSY failure Replace the paper eject sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: DF

Description: FAX communication error of main PCB.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie