Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9270CDN — Trang 16/28

Code: 8B

Description: Paper jam in the paper tray 2.
Causes: 1 Foreign object around the front of the paper tray 2. 2 Harness connection failure of T2 sensor PCB ASSY. 3 Harness connection failure of T2 Relay PCB ASSY. 4 T2 separation roller ASSY worn out. 5 T2 Relay PCB failure. 6 Engine PCB failure. 7 Main PCB failure.
Remedy: 1 Foreign object around the front of the paper tray 2 Remove the foreign object. 2 Harness connection failure of T2 sensor PCB ASSY Check the harness connection of the T2 sensor PCB ASSY and reconnect it. 3 Harness connection failure of T2 Relay PCB ASSY Check the harness connection of the T2 Relay PCB ASSY and reconnect it. 4 T2 separation roller ASSY worn out Replace the T2 separation roller ASSY. 5 T2 Relay PCB failure Replace the T2 Relay PCB ASSY. 6 Engine PCB failure Replace the engine PCB ASSY. 7 Main PCB failure Replace the main PCB ASSY.

Code: 8C

Description: Paper jam in the MP tray.
Causes: 1 Foreign object around MP tray. 2 MP paper feeding kit worn out. 3 MP registration front sensor failure. 4 Engine PCB failure. 5 Main PCB failure.
Remedy: 1 Foreign object around MP tray Remove the foreign object. 2 MP paper feeding kit worn out Replace the MP paper feeding kit. 3 MP registration front sensor failure Check the sensor performance following the procedure described in “Function code 32”. If any problem occurs, replace the MP paper empty/registration front sensor PCB ASSY. 4 Engine PCB failure Replace the engine PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.

Code: 8D

Description: Paper jam occurred around the back cover at the time when the power was turned ON, or the back cover is open.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 8E

Description: Error in the adjustment of inter-color position alignment result when implementing it.
Causes: 1 Harness connection failure of the registration mark L PCB ASSY or registration mark R PCB ASSY. 2 Registration mark sensor holder ASSY failure. 3 Main PCB failure.
Remedy: 1 Harness connection failure of the registration mark L PCB ASSY or registration mark R PCB ASSY Check the harness connection of the registration mark sensor holder ASSY and reconnect it. 2 Registration mark sensor holder ASSY failure Replace the registration mark sensor holder ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 8F

Description: Detection of abnormal value of registration sensor sensitivity when implementing adjustment of inter-color position alignment.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 90

Description: The paper size of the MP tray does not match that of the print setting.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 91

Description: The paper size of the paper tray 1 does not match that of the print setting.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 92

Description: The paper size of the paper tray 2 does not match that of the print setting.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie