Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9270CDN — Trang 28/28

Code: FA

Description: The black drum unit is not installed.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: FB

Description: The cyan drum unit is not installed.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: FC

Description: The magenta drum unit is not installed.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: FD

Description: The yellow drum unit is not installed.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: FE

Description: Detection of incorrect measurement value of density sensor sensitivity calibration.
Causes: 1 Harness connection failure of registration mark sensor holder ASSY. 2 Harness connection failure of shutter solenoid. 3 Registration mark sensor holder ASSY failure. 4 High-voltage power supply PCB failure. 5 Main PCB failure.
Remedy: 1 Harness connection failure of registration mark sensor holder ASSY Check the harness connection of the registration mark sensor holder ASSY and reconnect it. 2 Harness connection failure of shutter solenoid Check the harness connection of the shutter solenoid and reconnect it. 3 Registration mark sensor holder ASSY failure Replace the registration mark sensor holder ASSY. 4 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY

Code: FF

Description: Wireless LAN module overcurrent error.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie