Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC8890DW — Trang 5/12

Code: 72

Description: Laser beam emission failure
Causes: 1 Laser unit failure. 2 Main PCB failure.
Remedy: 1 Laser unit failure Replace the laser unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: 75

Description: Sensor of the inside temperature for detection detected higher than normal temperature
Causes: 1 Thermistor ASSY failure. 2 Main PCB failure.
Remedy: 1 Thermistor ASSY failure Replace the laser scanner unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: 76

Description: Rapid temperature rising failure (center thermistor)
Causes: 1 Fuser unit failure. 2 Main PCB failure.
Remedy: 1 Fuser unit failure Replace the fuser unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: 78

Description: Rapid temperature falling failure (center thermistor)
Causes: 1 Fuser unit failure. 2 Main PCB failure.
Remedy: 1 Fuser unit failure Replace the fuser unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: 7A

Description: No detection of main motor synchronous signal
Causes: 1 Motor failure. 2 Main PCB failure.
Remedy: 1 Motor failure Replace the main motor. 2 Main PCB failure Replace the main PCB ASSY.

Code: 7D

Description: Dirt on corona wire (detect discharge error)
Causes: 1 Dirt or dust on drum unit electrodes. 2 Charge HVPS PCB failure. 3 Main PCB failure
Remedy: 1 Dirt or dust on drum unit electrodes Clean the electrodes of the main body and the drum unit. 2 Charge HVPS PCB failure Replace the charge HVPS PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 7F

Description: Fax paper setting mismatch (The setting paper becomes besides the A4/Letter/Legal/ Folio) (Not applicable)
Causes: 1 Registration front actuator 2 catching on some position. 2 Main PCB failure
Remedy: 1 Registration front actuator 2 catching on some position Correct catching of the registration front actuator 2. 2 Main PCB failure Replace the main PCB ASSY.

Code: 80

Description: Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report)
Causes: 1 Registration front actuator 2 catching on some position. 2 Main PCB failure
Remedy: 1 Registration front actuator 2 catching on some position Correct catching of the registration front actuator 2. 2 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie