Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon D1520 — Trang 7/8

Code: E196-2000

Description: Main Controller PCB writing/reading error
Causes: Error in writing/reading of the setting values storage area in the Main Controller PCB
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E196-3000

Description: ROM writing/reading error (eMMC)
Causes: An error occurred when writing/reading data to/ from the ROM.
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E196-3001

Description: ROM-ID mismatch (eMMC)
Causes: An error occurred when writing/reading data to/ from the ROM.
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E202-0001

Description: CIS Unit HP error (outward)
Causes: The CIS Unit did not move to HP even it moved backward. Reader HP Sensor error, Reader Motor error, CIS Unit error
Remedy: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

Code: E202-0002

Description: CIS Unit HP error (homeward)
Causes: The CIS Unit did not move to HP even it moved forward. Reader HP Sensor error, Reader Motor error, CIS Unit error
Remedy: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

Code: E302-0001

Description: Light intensity of the CIS Unit below the reference level
Causes: When the light intensity is below the reference level at shading
Remedy: 1. Disconnect and then connect the Flexible Cable. 2. Replace the Flexible Cable. 3. Replace the CIS Unit. 4. Replace the Main Controller PCB (PCB2).

Code: E732-0000

Description: Scanner communication error
Causes: Scanner communication error
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E733-0000

Description: Printer communication error
Causes: Communication error between the Engine Controller PCB and the Main Controller PCB occurred.
Remedy: 1. Check the connector connection between the Engine Controller PCB and the Main Controller PCB. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. 4. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie