• Code: E014-0000
• Description: Fixing motor drive abnormality
• Causes: Fixing motor speed detection signal frequency does not reach specified frequency within 2.5 sec. or longer of the fixing motor drive starting. Cause: Fixing motor defect, DC controller PCB defect
• Remedy: - Replace fixing motor - Replace DC controller PCB

• Code: E014-0001
• Description: Fixing motor drive abnormality
• Causes: Fixing motor speed detection signal frequency reaches the specified frequency but is then out of synch after 2 sec. or longer of operation. Cause: Fixing motor defect, DC controller PCB defect
• Remedy: - Replace fixing motor - Replace DC controller PCB

• Code: E020
• Description: Density sensor abnormality
• Causes: Not enough light received upon image density detection. Cause: Soiled density detection sensor, density detection sensor defect, DC controller PCB defect, toner cartridge defect
• Remedy: - Replace ETB unit - High voltage contact defect (check contacts from high voltage contacts of each colour station to high voltage PCB.) - Replace DC controller PCB - Replace toner cartridge

• Code: E024-0000
• Description: Toner remaining detection sensor abnormality
• Causes: Abnormal output from toner remaining detection sensor (Yellow) Cause: Memory controller PCB defect, DC controller PCB defect, toner cartridge defect
• Remedy: - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB

• Code: E024-0001
• Description: Toner remaining detection sensor abnormality
• Causes: Abnormal output from toner remaining detection sensor (Magenta) Cause: Memory controller PCB defect, DC controller PCB defect, toner cartridge defect
• Remedy: - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB

• Code: E024-0002
• Description: Toner remaining detection sensor abnormality
• Causes: Abnormal output from toner remaining detection sensor (Cyan) Cause: Memory controller PCB defect, DC controller PCB defect, toner cartridge defect
• Remedy: - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB

• Code: E024-0003
• Description: Toner remaining detection sensor abnormality
• Causes: Abnormal output from toner remaining detection sensor (Black) Cause: Memory controller PCB defect, DC controller PCB defect, toner cartridge defect
• Remedy: - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB

• Code: E066
• Description: Environment sensor abnormality
• Causes: Environment sensor abnormality. Cause: Environment sensor defect, DC controller PCB defect
• Remedy: - Replace environment sensor - Replace DC controller PCB