• Code: E014 0000
• Description: Error in fixing motor startup
• Causes: Error in attaining the target fixing motor rotation detected based on fixing motor speed detection signal after fixing motor is actuated.
• Remedy: 1.Check connectors of ITB motor / DC controller PCB 2.Replace ITB motors 3.Replace DC controller PCBs

• Code: E014 0001
• Description: Error in fixing motor startup
• Causes: Error in fixing motor rotation after attaining the target rotation detected based on fixing motor speed detection signal.
• Remedy: 1.Check connectors of ITB motor / DC controller PCB 2.Replace ITB motors 3.Replace DC controller PCBs

• Code: E015 0001
• Description: Error in developing roller contact
• Causes: Failed to detect changes in developing home position sensor signals within the pre-defined time after actuating main motor to control the developing roller contact.
• Remedy: 1.Check connectors of developing home position sensor, main motor and DC controller PCB. 2.Replace developing home position sensors 3.Replace main motors 4.Replace DC controller PCBs

• Code: E020 0000
• Description: Error in density sensor
• Causes: Failed to receive sufficient light to detect image density
• Remedy: 1.Check DC controller PCB onnectors. 2.Replace ITB units 3.Replace DC controller PCBs 4.Replace toner cartridges

• Code: E021 1003
• Description: Error in developing motor
• Causes: Cause of developing motor rotation error: problem in developing motor / DC controller PCB
• Remedy: 1.Check connectors of developing motor and DC controller PCB. 2.Replace developing motor 3.Replace DC controller PCB

• Code: E021 2003
• Description: Error in developing motor
• Causes: Error in attaining the target developing motor rotation detected based on developing motor speed detection signal after developing motor is actuated.
• Remedy: 1.Check connectors of developing motor and DC controller PCB. 2.Replace developing motor 3.Replace DC controller PCBs

• Code: E024 0000
• Description: Error in toner level sensor
• Causes: Abnormal output of toner level sensor (Yellow)
• Remedy: 1.Replace toner cartridges 2.Replace high-voltage power supply PCBs 3.Replace DC controller PCBs

• Code: E024 0001
• Description: Error in toner level sensor
• Causes: Abnormal output of toner level sensor (Magenta)
• Remedy: 1.Replace toner cartridges 2.Replace high-voltage power supply PCBs 3.Replace DC controller PCBs