• Code: E602-1613
• Description: Device access error (CDS-related)
• Causes: Device access error (CDS-related)
• Remedy: 1. Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

• Code: E604-0000
• Description: Insufficient memory capacity
• Causes: Insufficient memory capacity
• Remedy: 1. Check the memory capacity of ROM mounted on the Main Controller. 2. Replace the Main Controller PCB.

• Code: E604-0001
• Description: Memory error
• Causes: Memory required to start PDL cannot be allocated.
• Remedy: Check the installed memory, remove and then install the memory, and replace the memory.

• Code: E616-0001
• Description: MEAP application is lost.
• Causes: MEAP application is lost.
• Remedy: 1. Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF and then ON the main power. * The setting is switched to the following after reboot. • Initial screen setting: Native • MEAP authentication: Off • USB-Host setting: Native • CDS-related: Off

• Code: E616-0002
• Description: System error
• Causes: System error
• Remedy: 1. Execute Setup > Initialize Menu to initialize NVRAM.

• Code: E730-100A
• Description: System error
• Causes: System error
• Remedy: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

• Code: E730-C000
• Description: An error, such as failure in memory retrieval at initialization, occurred.
• Causes: An error, such as failure in memory retrieval at initialization, occurred.
• Remedy: 1. Turning OFF and then ON the main power executes auto recovery.

• Code: E730-C001
• Description: An error occurred when accessing the controller.
• Causes: An error occurred when accessing the controller.
• Remedy: 1. Turning OFF and then ON the main power executes auto recovery.