• Code: E015-0000
• Description: Developing disengagement Motor error
• Causes: Error in rotation of the Developing disengagement Motor
• Remedy: 1. Check the connection of the Developing disengagement Motor. 2. Replace the Developing disengagement Motor. 3. Replace the DC Controller PCB

• Code: E020-0000
• Description: Color Displacement Density Sensor error
• Causes: Error in the Color Displacement Density Sensor
• Remedy: 1. Check the connection of the Color Displacement Density Sensor. 2. Replace the Color Displacement Density Sensor. 3. Replace the DC Controller PCB

• Code: E066-0000
• Description: Environment Sensor error
• Causes: Failure of the Environment Sensor was detected.
• Remedy: 1. Check the connection of the Environment Sensor. 2. Replace the Environment Sensor. 3. Replace the DC Controller PCB

• Code: E06F-0068
• Description: EEPROM access error
• Causes: A failure of the EEPROM is detected.
• Remedy: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

• Code: E078-0001
• Description: Primary transfer disengagement mechanism error
• Causes: Failure of the primary transfer disengagement mechanism
• Remedy: 1. Check that the ITB Unit is installed properly. 2. Check the connector between the Fixing Motor and the DC Controller PCB. 3. Replace the Fixing Motor. 4. Replace the DC Controller PCB

• Code: E100-0000
• Description: Yellow Laser Scanner error
• Causes: Failure of the Laser Assembly in the Laser Scanner Unit (Yellow)
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB

• Code: E100-0001
• Description: Magenta Laser Scanner error
• Causes: Failure of the Laser Assembly in the Laser Scanner Unit (Magenta)
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB

• Code: E100-0002
• Description: Cyan Laser Scanner error
• Causes: Failure of the Laser Assembly in the Laser Scanner Unit (Cyan)
• Remedy: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller P