Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon imageCLASS LBP712Cdn — Trang 6/17

Code: D7-nn-Error

Description: System error
Causes: System error
Remedy: - Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. - Output STATUS PRINT/ P-PRINT. - Collect Sublog - Collect information on conditions to reproduce the error - Obtain user's print data (binary data)

Code: D8-nn-Error

Description: System error
Causes: System error
Remedy: - Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. - Output STATUS PRINT/ P-PRINT. - Collect Sublog - Collect information on conditions to reproduce the error - Obtain user's print data (binary data)

Code: D9-nn-Error

Description: System error
Causes: System error
Remedy: - Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. - Output STATUS PRINT/ P-PRINT. - Collect Sublog - Collect information on conditions to reproduce the error - Obtain user's print data (binary data)

Code: E000-0000

Description: Fixing temperature rising error
Causes: Temperature of the Main Thermistor did not become the specified temperature although the specified time had passed.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit

Code: E001-0000

Description: Abnormally high fixing temperature 1
Causes: The Main Thermistor detected a temperature higher than the specified temperature.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit.

Code: E001-0001

Description: Abnormally high fixing temperature 2
Causes: The Sub Thermistor 1 detected a temperature higher than the specified temperature.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit.

Code: E001-0004

Description: Abnormally high fixing temperature 3
Causes: The Sub Thermistor 2 detected a temperature higher than the specified temperature.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit.

Code: E003-0000

Description: Abnormally low fixing temperature detection 1
Causes: Temperature of the Main Thermistor was lower than the specified temperature when the heater was ON.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Fixing Power Supply Unit. 2. Replace the Fixing Assembly. 3. Replace the Fixing Power Supply Unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie