Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF PRO 2000 — Trang 21/26

Code: EC51 3103

Description: USB Print bulk in bus error (support number : 6933)
Causes: Bus error occurs at print bulk in end point.
Remedy: 1 Check the cable connection and if the cable in use supports USB2.0. When connection is proper and USB2.0 is supported, reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3104

Description: USB sub system firmware error (support number : 6940)
Causes: USB firm error occurs.
Remedy: 1 Reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3105

Description: USB sub system command error (support number : 6941)
Causes: USB command error occurs.
Remedy: 1 Check the cable connection and if the cable in use supports USB2.0. When connection is proper and USB2.0 is supported, reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3106

Description: Timeout error of USB sub system (support number : 6942)
Causes: USB watch dog error occurs.
Remedy: 1 Reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3107

Description: USB sub system data copy error (support number : 6943)
Causes: USB-Relax firmware data copy error occurs.
Remedy: 1 Reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3108

Description: USB sub system instruction error (support number : 6944)
Causes: USB-Relax firm ware instruction copy error is occurs.
Remedy: 1 Reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3109

Description: USB sub system starting up error (support number : 6945)
Causes: Boot error of USB-Relax firmware occurs.
Remedy: 1 Reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)

Code: EC51 3110

Description: Timeout setting error of USB sub system (support number : 6946)
Causes: Initial value set error of USB-Relax firmware watch dog occurs.
Remedy: 1 Reinstall the firmware. The problem is resolved Complete. The problem is not resolved Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie